Jiangsu Bailite Transmission Technology Co., Ltd
Causes and solutions for noise in synchronous belts
The synchronous belt has good wear resistance and low noise, but sometimes there will be some larger noise problems. The following analyzes the reasons for the noise of the synchronous belt and shares effective measures to solve these noises. 1. First of all, the various noise symptoms generated by the synchronous belt When the synchronous belt is running, there are usually five noise symptoms. The belt screams or squeaks, the belt slaps, the belt wears, the belt grinds, and the belt makes abnormal nois
Synchronous belts are easy to break and fall off, causes and countermeasures
1. Causes and methods of easy breakage 1. Overload-----Change the design and increase the size of the synchronous belt 2. Overload due to mechanical accidents-----Prevent accidents from happening again 3. Overload due to excessive impact----Change the design or eliminate the impact load 4. The diameter of the synchronous pulley is small-------Change the design and use a pulley with a larger diameter 5. Belt bending------Pay attention to use
Several reasons for the heating of the synchronous belt
Several reasons for the heating of synchronous belts During the operation of synchronous belts, heat is generated by friction between the belt body of the synchronous belt and the wheel body of the synchronous belt pulley. 1. Damage of synchronous belts 1. If the tension of the synchronous belt is not enough, the friction will also be insufficient, which may cause slippage. At the same time, the wear of the synchronous belt will increase, which will affect the transmission load and make the transmission of the synchronous belt lose
Jiangsu Bailit Transmission Technology Co., Ltd. adheres to the concept of "Quality qualification is the social obligation, and quality excellence is the contribution to society", and the Quality Month activity of "Deepening the Quality Month Activities and Comprehensively Improving the Three Awarenesses" has been fully launched. On July 6, 2024, all employees of Bailit Transmission Technology held the "Quality Month Activities" launch conference. Zhu Tong, chairman and general manager of the company, delivered an important speech at the meeting: Everyone often says that qualit
The company held the 2024 "Safety Production Month" kick-off meeting
In order to thoroughly implement the national safety production spirit and effectively improve the level of safety production management, the company held the 2024 "Safety Production Month" kick-off meeting on June 8. All employees attended the meeting. Zhu Tong, the company's general manager, presided over the meeting and delivered a speech, pointing out the direction for the company's safety production work. At the meeting, all personnel concentrated on learning the specific requirements of the provincial, municipal and district levels on safety production w
On the morning of June 27, 2024, Shi Fangzhen, deputy secretary of the Party Committee of the School of Materials of Nanjing Tech University, and his party came to the company to conduct enterprise visits and school-enterprise cooperation. Zhu Tong, chairman and general manager of the company, accompanied them. Shi Fangzhen and his party went deep into Jiangsu Bailite Transmission Technology Co., Ltd. for a field visit, and reached an intention to cooperate on jointly building a scientific research platform, tackling technical problems, jointly building a base
Rubber timing belt PK polyurethane timing belt
Zhongsheng Belt Group is a company specializing in the research and development, production and sales of synchronous belt transmission products, with 20 years of design, manufacturing and sales experience. It specializes in the production of various types of synchronous belts, rubber synchronous belts, PU synchronous belts, synchronous pulleys and other products. The company has first-class domestic production and manufacturing equipment and advanced testing methods, and has a high-quality workforce. The company adheres to the principle of "value comes from core technology", gathers domes
Synchronous belt, principle, characteristics, motion mode, tensioning method
1、 Principle of synchronous belt: A synchronous belt is a flexible circular belt with teeth, and the synchronous pulley is machined with grooves that match the tooth shape of the synchronous belt. Power is transmitted through the meshing of teeth and grooves. There is no relative sliding between the synchronous belt and the synchronous pulley, ensuring synchronization between the two synchronous pulleys. 2、 Exercise mode: 1. Continuous transmission 2. Intermittent transmission 3. Reciprocating transmission
High-speed rail and subway intelligent ticket checking mechanical transmission belt
In recent years, with the rapid development of the high-speed rail era, the use of smart ticket checking machines has become more and more common. Smart ticket checking machines are an important part of the automatic ticket checking system. The traditional ticket checking method is to enter the venue through manual ticket checking, which is very efficient. Very low. The emergence of intelligent ticket checking machinery not only reduces the work intensity of ticket checking personnel, but also improves efficiency. It is very convenient and fast to use! The h
Application of rubber timing belts in the medical industry
The medical industry has particularly strict requirements for accurate and reliable equipment. Rubber timing belts, as an important transmission component, are widely used in medical equipment. Rubber timing belt with its excellent performance High performance and reliable transmission effect provide key support for the stable operation of medical equipment. This article will introduce the application and advantages of rubber timing belts in the medical industry and reveal its importance in ensuring patient safety.
New productivity: synchronous belts are more energy-saving than V-belts
Among various transmission systems, belt drive is the most widely used and plays an important role in all walks of life. Especially in energy and electric motor drive systems, it is indispensable. The country spends up to 100% on energy and electric drive systems every year. More than 100 billion yuan, and there are tens of millions of motors in operation. However, most of them are not operating at optimal efficiency, but consume 70% of the power in the factory.
Analysis and suggestions on import and export of hose and tape products
In 2023, my country's industrial economy will generally show an upward trend. The capacity utilization rate of hose and tape companies has increased steadily, and output has grown steadily. At the same time, the industrial development of the world's major economies and emerging economies has picked up, and the demand for hose and tape products in overseas markets has further expanded, creating good conditions for th
The company successfully passed the ISO three-standard management system certification
Recently, after a three-day rigorous review by the expert audit team of Jiangsu Jiuzhou Certification Co., Ltd., Jiangsu Bailite Transmission Technology Co., Ltd. successfully passed the ISO9001 quality management system, ISO14001 environmental management system, and ISO45001 occupational health and safety management system certifications and obtained the certificate. The re-certification of the first system marks that the company has reached a new level in "standardization, normalization and refinement" management, laying a solid foundation for further improving
How to prevent problems with belt flatness
1. Different types of parallelism The first type is non parallel between one axis and the other (but both axes are horizontal), the second type is non parallel due to the offset of the pulley installed on the axis, and the third type is non parallel between two axes, and one or both axes are not parallel to the horizontal plane.
How to buy Rubber Industrial Timing Belt?
To choose a Rubber Industrial Timing Belt, you can follow the following steps: 1. Determine the usage environment: Rubber Industrial Timing Belt come in different types and specifications, suitable for different working environments and application scenarios. Determining the usage environment, such as temperature, humidity, chemicals and other factors, can help select the appropriate rubber timing belt.
Classification of industrial belts
As the name implies, industrial belts are belts used in industry, also known as transmission belts. Compared with gear transmissions and chain transmissions, industrial belt transmissions have the advantages of simple mechanism, low noise and low equipment cost. They are widely used in various electric motors and internal combustion engines. Power transmission on machinery and equipment. According to different uses and structures, industrial belts can be divided into various categories.
To be precise, it is an industrial belt, also known as a transmission belt. After the 20th century, influenced by the technological progress of machinery manufacturing, electrical machinery, chemical industry and metallurgy industry, it has been continuously improved. Material handling between cities and even cities has become an indispensable part of the mechanization and automation of material handling systems.
In 2022, the company will invest 30 million yuan to implement technical transformation
In order to improve the level of technology and improve the production equipment, testing equipment, testing instruments and environmental protection facilities of "bringing the old with the new", Jiangsu Bailit Transmission Technology Co., Ltd. decided to invest 30 million yuan to implement the production line technology of one-time heating and forming rubber industrial synchronous belts. Reconstruction project. The construction period of the project is 12 months, adding 2 forming machines, 2 grinding machines, 6 vulcanizing tanks, 3 double-sided gear forming machines, 30 sets of
Zhongsheng Transmission Technology has consistently developed synchronous belts for 20 years
The writer Gladwell once said that 10,000 hours of tempering is a necessary condition for anyone to become a world-class master from an ordinary person. Regardless of whether this law applies to all fields, we seem to be able to realize that long-term efforts and persistence are a universal law of success. At present, there are many synchronous belt manufacturers in China, but Jiangsu Bailit Transmission Technology Co., Ltd., established in 2002, is an earlier enterprise in the industry dedicated to the research and development and production of transmission products. It has been temper
The development status of Zhongsheng timing belt and the same industry in China
With the continuous expansion of synchronous belt in the application field and the increasing demand year by year, the requirements for the use of synchronous belt transmission are also increasing. There are also many problems and defects exposed in synchronous belt transmission, which need to be analyzed and verified by experiments and demonstrated theoretically. These problems promote the research and development of synchronous belt transmission theory. Since the invention and application of the trapezoidal profile synchronous belt, a variety of toothed synchronous belts have been widely use
Pay attention to the standard steps when replacing the industrial synchronous belt
When replacing these products with pulleys, the power should be turned off in advance, the protective cover should be removed, and the mounting bolts of the motor should be loosened. Move the motor so that the timing belt is sufficiently slack to remove the drive belt without prying it off. Never pry the belt off. Remove the old drive belt and check for abnormal wear. Excessive wear may indicate a problem with the design or maintenance of the transmission, Needless to say, choose a suitable synchronous belt to replace. To clean the transmission belt and the transmission pulley, yo
Whatsapp: 8613912190815
Address: No.9 Longgang Road, gaogang district, Taizhou, Jiangsu China
Website: https://www.zsindustrialbelt.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
