Precautions for Rubber Double Sided Timing Belt storage

Recommendation: The Rubber Double Sided Timing Belt should be stored in a cool and dry environment without direct sunlight, with the ideal storage conditions being below 30 degrees Celsius. In environments with humidity below 70%.

Prohibition: Do not place the Automobile Timing Belt near the window to prevent direct sunlight and moisture erosion. Do not place Rubber Synchronous Timing Belt in the ventilation opening of equipment with heat sources, radiation, and heat sources. Prohibit placing belts near transformers and electric motors to prevent ozone pollution. Do not place the belt in an environment with chemical release. Do not place the belt directly on the floor unless protected by a dedicated box. It is prohibited to bend the belt during installation and storage. The bending radius of the belt must meet the standards recommended by our company (see the minimum bending radius recommendation for details). It is prohibited to bundle the belts together, especially the bent ends of the belt. It is prohibited to store the Rubber Synchronous Timing Belt hanging, as it may result in a small bending radius (which may be lower than the minimum bending radius recommended by our company). Incorrect storage methods may cause damage to the rope of the belt and lead to early failure of the belt. When taking the belt from the warehouse to the site for installation, special attention should also be paid to avoid the occurrence of the above prohibited items.

Storage of belts; If its storage temperature does not exceed 30 ° C and humidity does not exceed 70%, the belt can still be used after 6 years of storage. When the storage temperature exceeds 30 ° C, the lifespan of the belt will decrease by about half for every 10 ° C increase in temperature. Belts are prohibited from being stored in environments with temperatures exceeding 46 ° C, otherwise the belt failure time will be greatly advanced. If the humidity exceeds 70%, fungi and molds may be produced in this environment, which can affect the performance of the belt, so it is also important to avoid them as much as possible. If the equipment is shut down for more than 6 months, the belt should be removed, and its storage environment should also meet the above requirements, with a temperature not exceeding 30 ° C and a humidity not exceeding 70%.

Rubber Industrial Timing Belt include：Trapezoidal Toothed Rubber Timing Belt，Arc Toothed Rubber Timing Belt，T Toothed Rubber Timing Belt.